Fermzilla All-Rounder Starter Kit Instruction Manual
Page
3
of
4
www.KegLand.com.au
Last Updated 19/03/2020 6:20 PM
11.
Do not over tighten carbonation caps onto the threads of the lid or collection
container, doing so could result in the thread being stripped. We recommend using
the plastic carbonation and line cleaning cap (
KL10788
).
12.
Avoid lifting the FermZilla while full.
What’s in the box
•
1 x Fermzilla – 30L all-rounder fermenter
•
•
•
2 x PET bottle caps
•
Step
-
by
-
step instructions
1.
Assembling the fermenter.
Once you have unboxed your KegLand 30L Flat-Bottom starter kit and checked everything is
included, begin by assembling your fermenter.
FermZilla – Lid Assembly
1.
Ensure the lid assembly has the o-ring
attached.
2.
Apply some food grade lubricant to the o-ring
to extend the life of this o-ring and threads.
3.
Place the lid onto the neck of the tank and
screw down the threaded lid ring.
4.
Use the two bottle caps to close the two
threaded holes in the lid.
5.
Push the three piece air-lock into the remaining (central) hole of the lid
2.
Cleaning and sanitizing the fermenter and equipment
1.
Rinse the walls of the FermZilla vessel with cold water. A garden hose is particularly
useful for rinsing and dislodging yeast/hop matter.
