Page
15
of
29
http://www.KegLand.com.au
Last Updated 12/01/2021 09:01 AM
Digital Controller and Temperature
Settings
Display
Actual Temp
– This displays the current temperature. Please be aware that this is
the temperature that is taken at the bottom of the BrewZilla close the element. As
a result this temperature will often not be the same as the core temperature inside
the grain in the malt pipe. Typically if you want to increase the core temperature of
the grain in the malt pipe you will have to set the target temperature several
degrees warmer than your desired mash core temperature.
Target Temp
– This is the target temperature at which the elements will continue
to operate. Once the target temperature is reached the elements will turn off.
When set to a boil the symbols HH will be shown indicating that the elements are
always on.
Time Elapsed
– This is the amount of time that has elapsed. This will only be
displayed in auto mode.
Target Time
– This is the amount of time allocated to a particular stage. This will
only be displayed in auto mode. The once the time elapsed has reached the target
time the unit will cycle to the next stage.
Stages 1-6
– This model has 6 different stages at which you can preset a time and
temperature. Once the time has cycled out from one stage it will jump to the next
stage. Once all the stages are complete the alarm will sound. If you set 00:00 in
the time for a particular stage that stage will be skipped.
