BrewZilla 100L - Gen 4 Instruction Manual
Page
11
of
48
www.KegLand.com.au
Last Updated 09/02/2024 12:20 PM
Perforated False Bottom Assembly and Installation
The 100L BrewZilla Gen 4.0 includes a perforated false bottom.
This false bottom is designed to prevent your pump drawing in
more than 95% of solids such as hop pellets. It has NOT been
designed so you can place grain directly onto this screen and is not
designed to hold the weight of a grain bill. The false bottom adds
significantly to the reliable operation of the BrewZilla and it’s
recommended that this screen is always in place if the pump is
going to be used.
The false bottom has legs that suspend it about 14mm above the
base of the dome of the boiler so all liquid that exits into the pump
or out via the ball valve will be filtered by this screen.
To aid in lifting out the false bottom install the eye bolt assembly,
washers and locking nut onto the false bottom. These parts are
included in your BrewZilla kit.
TIP: For easy removal of the false
bottom from the pull up on both the
central and outer eye bolts at the
same time.
