BrewZilla 65L - Gen 4 Instruction Manual
Page
10
of
48
www.KegLand.com.au
Last Updated 30/08/2022 10:40 AM
Digital Controller Assemby
The BrewZilla Digital Controller is mounted in a position at the top of the boiler with a tilting
frame so you can adjust the angle of the screen depending on your height, improving the
overall ergonomics of the system.
To mount the Digital Controller onto the boiler, slide the
controller onto the bracket using the grooves which are
moulded into the rear of the controllers housing.
Adjusting the Angle of the Digital Controller
To adjust the angle of the screen, loosen the two bolts which hold the bracket in place on the
boiler. Then adjust the angle of the bracket to your desired angle and tighten the bolts to hold
the bracket in this position.
Tip: if you require a greater angle for the Digital Controller the mounting bracket can be
rested on the bolt as shown below to the right.
