KegLand Distribution PTY LTD
www.KegLand.com.au |
| +61 3 90187935
The clamps that are included with the Bottle Filler Beer Gun are the stepless type which just slip over the beer line and
then using a set of wire cutters crimp the “ear” of the clamp firmly. (as shown below)
Usage Instructions
The Bottle Filler Beer Gun can be used to fill growlers, bottles, glasses, or any other container. The length of beer
hose connected to the beer gun can be altered to get a faster or slower flow rate. We recommend between 2-4 meters
of 5mm ID beer line.
Step 1
Chill bottles to the same temperature of the beer.
Step 2
Turn on CO2 gas supply and set the pressure to 2-4psi.
Step 3
Place the beer gun into the bottle so the end of the beer gun is right against the bottom of the bottle. Depress the
brass trigger that allows the CO2 gas to flow into the bottle.
Step 4
Quickly open the beer trigger valve and continue pressing the valve until the bottle has completely filled.
