background image

 

8510 Miralani Dr.  

San Diego, CA 92126 

(888) 980 - 4810 

[email protected] 

 

IMPORTANT SAFETY INFORMATION

1.

 

You must read and follow all instructions. 
Serious bodily injury or death could occur if 
you ignore this warning. 

2.

 

All circuit breakers and/or disconnect switches 
servicing the HOT DRAFT® Tower must be 
turned off when installing, uninstalling, or 
repairing this unit. 

3.

 

The Tower must be installed by a licensed 
electrician.  

4.

 

The Tower must be wired in accordance with 
the current version of the National Electrical 
Code (US) or Canadian Electric Code (Canada). 

5.

 

This installation must comply with all national, 
state, and local plumbing and electrical codes. 

6.

 

When the Tower is not within sight of the 
electrical circuit breakers, an additional local 
means of disconnection of all ungrounded 
conductors must be provided that is within 
sight of the appliance or a circuit breaker 
lockout must be used. (Ref. NEC 422.31) 

7.

 

If the Tower is installed in a location where 
liquid damage could occur in the event of a 

leak, it is recommended that a drip pan be 
installed and connected to a suitable drain.  

8.

 

This is a closed system meaning that the 
product is coming from a container under 
pressure or from a vacuum system of delivery. 
Adhere to the labeling requirements on the 
containers regarding allowable pressure and/ 
or delivery recommendations so that system is 
not compromised.  

9.

 

Product containers such as kegs, bag-in-box, or 
other types of product packaging each come 
with guidelines as to maximum pressure 
allowed or recommended delivery instructions 
required for safe handling. It is imperative that 
operator follow these guidelines at all times! 

10.

 

This Tower must be installed in a location 
where it is not subject to freezing 
temperatures unless supplied with factory 
installed freeze protection. 

11.

 

This Tower is not rated for outdoor use. This 
Tower must be installed indoors to function as 
intended. 

Beverage Factory 

Phone: 1-(800) - 710-9939

 

 

 

Summary of Contents for Hot Draft KC HDT301




















Reviews: