6
1-888-980-4810
Reversing the Door
You will need to tilt the fridge backwards to access the lower hinge that holds the screws. Do not tilt the appliance more
than 45 degrees and do not lay it flat on its side.
1. Remove the top plastic hinge cover and set aside.
2. Unscrew the 3 screws from the metal bracket and set
aside. Then, carefully remove the door and place it on a
cushioned surface.
3. Remove the plastic insert on the opposite side of the
fridge and door. Then, attach the top door bracket to this
side using the screws that were previously removed.
Replace the plastic hinge cover.
4. Remove the adjustable foot at the bottom of the fridge
and set aside.
5. Unscrew the two screws holding the bottom door
hinge and carefully move it across to the opposite side.
Before fixing it into position, fit the door to the top and
bottom hinge, taking care as the door will be loose.
Then, screw in the adjustable foot on the opposite side of
the fridge.
Check that the door opens and closes properly after you have completed the door reversal process. Wait until the
appliance has been upright for a minimum of 3 hours before turning it on.
Summary of Contents for HK-46-SD
Page 11: ...www kegco com 11 1 888 980 4810...
