www.Kegco.com
7
1-800-710-9939
Troubleshooting
There are many common issues you may experience with your beverage cooler that can be solved very easily, without
the need of a service call. Try the tips below to troubleshoot your unit should you experience any problems:
PROBLEM
POSSIBLE CAUSE
Beverage cooler does not operate
Not plugged in or the appliance is turned off
The circuit breaker tripped or a fuse has blown out
Beverage cooler is not cold enough
Check the temperature control setting
External environment may require a higher setting
The door is opened too often
The door is not closed completely
The door gasket is not sealing properly
Beverage cooler is turning on and off frequently
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work
Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
The light button is “OFF”.
Vibrations
Check to assure that the Beverage cooler is on a level surface.
The beverage cooler seems to make too much noise
A faint humming noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the
flow of refrigerator in your beverage cooler.
Contraction and expansion of the inside walls may cause
popping and crackling noises.
The beverage cooler is not on a level surface.
The door will not close properly
The beverage cooler is not on a level surface.
The gasket is dirty.
The shelves are out of position.
