22
23
Using the Preset Equalization options
Left and Right EQs and LFE EQs are pre defined by
KEF’s acoustics engineers to allow easy selection of
the most useful response adjustments.
They can be independently selected enabling a
different EQ to be applied to the L+R inputs and
the LFE line level input.
EQ0
Standard (Default)
EQ1
Bass Extension
EQ2
Low Bass Lift
EQ3
Upper Bass Lift
EQ4
Mid Bass Cut
EQ5
High Pass Filter
EQ6
High Pass Filter with Upper Bass Lift
Using the Room Correction facility
The Reference 209 subwoofer includes a room correction facility to optimise the performance in different
listening environments.
In order to apply the room correction function to compensate for your specific room you need to connect
the microphone and take four measurements.
These microphone measurements should be well spread out across the room and should not be
concentrated around the listening position. Please note that you can press SETUP at any point to abort the
room correction process and stop the sweep sounding.
Connect the supplied KEF microphone with the
supplied XLR lead to the rear of the subwoofer.
Press room correction SETUP on the remote control.
Remove the grille and place the microphone
2 inch (50mm) away from the subwoofer driver.
*
Press SELECT and wait whilst a sweep is sounded.
Place the microphone in a far left position.
*
Press SELECT and wait whilst a sweep is sounded.
Place the microphone in a central position within
the room.
*
Press SELECT and wait whilst a sweep is sounded.
Place the microphone in a far right position.
*
Press SELECT and wait whilst a sweep is sounded.
The new room correction algorithm is then
automatically saved.
Finally, select the Room Correction Level to be
applied to the acoustic output of the subwoofer.
The Room Correction Level can be switched off or altered between level 1, the minimum, to level 5 the
maximum amount applied to the acoustic output. Room Correction Level 3 is the default value.
K7262 REF 209208 Combined Manual_v2 12/2/08 12:40 Page 22
Summary of Contents for REFERENCE 209
Page 1: ......
Page 27: ...K7262 REF 209208 Combined Manual_v2 12 2 08 12 41 Page 50 ...
Page 28: ......