Small, Medium, Large and XL-Con
Error indication
Warning flashing:
•
Clamps not connected to battery.
•
Mains cable not plugged in or mains switch not switched on.
•
Supply: overload, i.e. the voltage is dropping due to loading with more
than the nominal current (8/15/30A).
Warning constant:
Before start of charging
•
Over voltage. E.g. a 12V charger connected to a 24V battery.
•
Shorting the clamps.
•
Clamps polarized wrong (i.e. plus to minus and vice versa).
While charging
•
Battery can not be charged within the time of the security timer. If the
battery is larger than the recommended maximum size, charging once
more might help. If the Warning comes on during charging, try using the
Intelligent Boost function.
There can be two reasons for no indication in the battery tester during
testing:
•
The battery in the car is deep discharged.
•
Wrong polarization of the charger to the battery.
Maintenance
The charger can be cleaned with a moister cloth. Running water and deter-
gent contained solvent may not be used.
Repair of the chargers may only be done by an authorised shop and that
includes replacement of the battery cables.
