KEENCUT SmartFold Bench, Assembly Manual

Page: 30 / 48

30
Section
3
How to build right hand leg frame
4mm
4mm
C
C
1. 2.
3.
1.
Take corner leg 1 (page 26) and lay one on the floor. Place a beam2
(part C - page 4) on each bracket. Do not tighten the screws yet.
2.
Place corner leg 3 over the other end of the beams. Press down and
ensure all the beam ends are flush against the leg
3.
Tighten the screws using the 4mm Allen key supplied. There are
lots of screws, so you can save time by using a battery operated
screwdriver. Whichever method you use, fasten the screws firmly
with the Allen key.
All manuals and user guides at all-guides.com