6.2
2
Operation
6.2
2
Using the Scoring blade
Changing the Scoring blade
The scoring blade is designed to score acrylics, plexiglass and other similar rigid plastics. Trials should be carried out
on scrap materials first to ensure you obtain the required standard of cut.
Scoring/Breaking Technique
Select the Scoring Blade position on the turret and clamp the material in the machine.
1.
Turn the Rachet Hold-off Knob to disengage the rachet.
2.
Clamp the plastic to be scored in the machine, position and depress the cutting head so that the blade
touches the plastic at the top.
3.
Apply thumb pressure to the cutter and draw the blade down the material in one continuous motion.
Remove the plastic from the machine and snap it by hand.
CAUTION: ALWAYS USE HAND AND EYE PROTECTION WHEN SNAPPING PLASTIC
Changing the Scoring blade
Unlock and swing down the cutter guard, rotate the turret so the scoring blade is facing outwards.
1b.
Release the blade clamping screw.
2b.
Eject the blade using the black ejector pin, replace the blade to the right of the clamping plate, push the blade
in as far as it will go and tighten the blade clamping screw.
Rotate the turret back to the cutting position. Replace the guard ensuring it is locked closed.
Replacement blades are available from Keencut or your distributor.
1b
2b
➠
➠
➠
MyBinding.com
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
