KEENCUT Evolution3 SmartFold, Assembly Manual

Page: 46 / 48

46
Section
1.5m (5’)
1.2m (4’)
Preparing the worktop
Worktop width = 1220mm (8’) or 1525mm (10’) dependent upon cantilever
Unit Type 3050mm (10’) long boards 2440mm (8’) boards
SFB110
1440mm (56 5/8”) 1440mm (56 5/8”)
SFB160
1940mm (76 3/8”) 1940mm (76 3/8”)
SFB210 2440mm (96”) 2440mm (96”)
SFB260 2940mm (115 5/8”) 2x1470 (2x 57 3/4”)
SFB310 2280mm (45 5/8” + 89 3/4”) 2280mm (45 5/8” + 89 3/4”)
SFB360 2614mm (52 1/8” + 102 7/8”) 2x 1287mm (2x 52 1/8” + 50 5/8”)
SFB410 2946mm (58 3/4” + 115 7/8”) 2x 1453mm (2x 58 3/4” + 57 1/8”)
SFB460 2x2470mm (2x 97 1/8”) 2x 2x1215mm (2x 48 1/8” + 2x 47 3/4”)
SFB510 2x2720mm (2x 107”) 2x 2x 1340mm (2x 54 1/4” + 2x 52 3/4”)
4
The worktop should be cut from 18mm (3/4”) thick MDF or plywood, to the
exact size specified above. These sizes have been designed to ensure that
all joins are directly over a beam. Do not use over-sized boards because
excessive overhang can interfere with the cutter when you use the purple
cutting strip.