KEENCUT Evolution3 SmartFold, Assembly Manual

Page: 26 / 48

26
Section
Unit Type Corner leg 1 Corner leg 2 Corner leg 3 Middle leg 1 Middle leg 2
SFB110
2 1 1 0 0
SFB160 / SFB210 / SFB260 2 1 1 1 1
SFB310 / SFB360 / SFB410 2 1 1 2 2
SFB460 / SFB510 2 1 1 3 3
D D D D D D
Build the legs
Add the brackets (page 23) to the leg (part D)
3
The lower brackets can be fixed at any point along the leg as long as they are all the same distance from the upper
brackets. Use a tape measure or make a spacer from an off-cut of board as shown in purple on corner leg 1.
IMPORTANT: The brackets must be inserted into the legs in the orientation specified. If the orientation of the brackets
does not match the image above, the bench will not assemble properly.
Corner leg 1 Corner leg 2 Corner leg 3 Middle leg 1 Middle leg 1