3.3
Assembly
3.3
Stage 3
1.
Lay one of the Bench Edge Extrusions
flat side down on the floor together
with the RH Bracket and the RH
end frame as shown.
2.
Push the tongue into the
hollow in the Bench Edge Extrusion.
3.
Push the Bench Edge
Extrusion/RH Bracket onto
the Joining Bracket on the
End Frame.
4.
Tighten both Grub screws ensuring
there is no gap between the Bench
Edge Extrusion and the Leg.
NOTE:
Once the frames have been assembled check that all the brackets are in the correct
position and facing the correct way (i.e. flat face to the inside of the bench as shown
in Stage 1, part2) continue to Stage 3. This part of the assembly is carried out by
constructing the bench upside down, check you have enough space and manpower
to turn the bench over when complete.
PLEASE NOTE!
For the grub screws to lock the
bench securely it is important to
use a hand wrench to completely
tighten the screws.
RH
RH
