KEENCUT BenchTop Bench BTB110, Assembly Manual

Page: 46 / 48

46
Section
1.5m (5’)
1.2m (4’)
Preparing the worktop
Worktop width = 1220mm (8’) or 1525mm (10’) dependent upon cantilever
Unit Type 3050mm (10’) long boards 2440mm (8’) boards
BTB110
1520mm (59 3/4”) 1520mm (59 3/4”)
BTB160
2020mm (79 1/2”) 2020mm (79 1/2”)
BTB210 2520mm (99 1/8”) 2x1260mm (2x 49 1/2”)
BTB260 3020mm (118 7/8”) 2x1510 (2x 59 3/8”)
BTB310 2334mm (46 5/8” + 91 7/8”) 2334mm (46 5/8” + 91 7/8”)
BTB360 2666mm (53 1/4” + 104 7/8”) 2x 1313mm (2x 53 1/4” + 51 5/8”)
BTB410 3000mm (59 3/4” + 118 1/8”) 2x 1480mm (2x 59 3/4” + 58 1/4”)
BTB460 2x2510mm (2x 98 3/4”) 2x 2x1235mm (2x 50 1/8” + 2x 48 1/2”)
BTB510 2x2760mm (2x 108 5/8”) 2x 2x 1360mm (2x 55” + 2x 53 1/2”)
4
The worktop should be cut from 18mm (3/4”) thick MDF or plywood, to the
exact size specified above. These sizes have been designed to ensure that
all joins are directly over a beam.
IMPORTANT: Board widths include a 20mm (3/4”) overhang at each end.