2 5
EP59-50399
Issue D
English
To charge the battery:
1. Plug the power supply in to the Pulsair EasyEye.
2. The
Status Indicator
lights yellow, this indicates that the battery is
charging.
3. When the yellow LED extinguishes the battery is fully charged and
ready for use.
Maintenance and Cleaning
Clean the puff tube lens on a weekly basis:
1. Unscrew the white plastic shroud fitted over the puff tube lens
assembly.
2. Moisten a cotton bud with Isopropyl Alcohol.
3. Move the tip of the bud around the lens in a circular motion.
4. After one circle the bud should be discarded to avoid smearing on the
lens.
5. Look at the puff tube lens from the patient’s side, if traces of tear film
can still be seen, repeat above steps until clear.
6. Replace the white plastic shroud, and ensure the trim ring position is
correct before tightening.
Note:
Care should be taken not to damage the Puff Tube assembly during
cleaning.
Caution
Never use a dry cotton bud or tissue to clean the puff tube lens. Never use a
silicone impregnated cloth or tissue to clean the puff tube lens.
Summary of Contents for Pulsair EasyEye
Page 1: ......
Page 32: ...31 EP59 50399 Issue D English Notes ...
Page 33: ...32 EP59 50399 Issue D English Pulsair EasyEye ...
