Keeler All Pupil 2, Instructions For Use Manual

Page: 6 / 28

4
EN
ALL PUPIL II by KEELER
Observe the following precautions in order to ensure safe operation of the instruments.
WARNINGS
• Never use the instrument if visibly damaged and periodically inspect it for signs of damage
or misuse.
• Check your Keeler product for signs of transport / storage damage prior to use.
• Do not use in the presence of fl ammable gases / liquids, or in an oxygen rich environment.
• US Federal Law restricts this device to sale by or on the order of a physician or practitioner.
• This device is intended to be used only by suitably trained and authorised healthcare
professionals.
• This product should not be immersed in fl uid.
• Do not disassemble or modify the battery. There are no serviceable parts inside.
• Do not dispose of battery in fi re, puncture or short circuit.
• Do not use a battery that is deformed, leaking, corroded or visually damaged. Handle
a damaged or leaking battery with care. If you come into contact with electrolyte,
wash exposed area with soap and water. If it contacts the eye, seek medical attention
immediately.
• No modifi cation to this equipment is allowed.
• The mains plug is the means of isolating the device from the mains supply. Ensure both the
power switch and mains plug are always accessible.
• Do not fi t mains power adapter into a damaged mains outlet socket.
• Route power cords safely to eliminate risk of tripping or damage to user.
• Before any cleaning of the instrument or the base unit ensure the power lead is
disconnected.
• Bulbs / LEDs can reach high temperatures in use – allow to cool before handling.
• Do not exceed maximum recommended exposure time.
• After removal of the bulb / LED do not touch the bulb / LED contacts and the
patient simultaneously.
CAUTION
• Refraction stand variants or adaptors should only be used in combination with EN/IEC
60601-1 and EN/IEC 60601-1-2 compliant power supplies and devices.