Height Right High Chair
• Always secure child in the restraint
• Never leave child unattended
• Always keep child in view
• Secure straps tightly
• Never use as a stepping stool
• The front edge of the footrest should never
extend beyond the bottom edge of the front
supports at floor level
WARNING
:
!
WARNING
:
Seat Plate must be installed in the top
slot while using Plastic Crotch Bar, with Tray, or grabrail.
!
!
Parts
3
a.
b.
4
a
e
d
Insert a Wooden Dowel (e) into the larger hole in each of the Back Supports
and Front Support. Insert a Wood Nut (a), as shown into the inner holes of
the 3 Supports. Attach the 3 Wooden Supports as shown and insert Long
Screws (d). Loosely tighten the Long Screws into Wood Nuts through the Left
Side with the Allen Key. Labeling on the Rear Supports should be visible.
Attach the 2 Metal Cross Bars as shown and
insert Screws (c) . Loosely tighten the
Screws (c) into the Metal Cross Bars through
Both sides with the Allen Key.
Insert the rest of the Dowels, Wood Nuts, and
Screws as needed to attach the Right Side of
the chair. Do Not fully tighten screws.
Insert a Wood Nut (a), as shown into the inner holes of the Back. Attach the
Back as shown and insert a Long Screw (d). Loosely tighten the Long Screw
into Wood Nut through the Left Side with the Allen Key.
Left Side
Right Side
Foot Rest
(8 pcs.) (4 pcs.)(6 pcs.)(8 pcs.)
a
b
c
d
e
(6 pcs.)
Right + Left Cap Right + Left Clip
Seat Plate
Seat Pad
FRONT
SUPPORT IS
SHORTER
HARDWARE
a
(3pcs.)
d
(3pcs.)
e
(3pcs.)
HARDWARE
a
(4pcs.)
d
(4pcs.)
e
(3pcs.)
HARDWARE
c
(4pcs.)
HARDWARE
a
(1pcs.)
d
(1pcs.)
a
d
d
d
d
c
c
d
c
c
Logos this side
1
2
WARNING
:
The child should be secured in the high chair at all times by the restraining
system. The tray is not designed to hold the child in the chair. It is recommended that the chair be
used only by children capable of sitting upright unassisted.
!
WARNING
:
Prevent serious injury or
death from falls or sliding out.
2 Back Supports
Front Support
2 Metal Cross Bars
Allen Key
Plastic Crotch Bar Tray & Plastic Cover
Back
• SHORTER THAN
BACK SUPPORTS
Align the Plastic Crotch Bar as shown to bottom
of Seat Plate and insert Screws (c) . Tighten the
Screws (c) into the Seat Plate bottom with the
Allen Key.
HARDWARE
c
(2pcs.)
* 3 Point Crotch Belt
attachment buckle will
nest between seat plate
& Plastic Crotch Bar.
c c
US
2
