Installation Guidelines
Clock Set:
: Volume Set
All KEE Bio-Guard Units are supplied pre-set.
(See sheet inside unit for settings)
To check and adjust the clock
l
To check the clock
, press and hold the ‘CLOCK’ button. The display should show the
currenthour of day.
(NOTE: the clock only displays hours)
.
l
To set the clock,
press and hold the ‘CLOCK’ button, after 5 seconds the hours will
increase. Let go of the button when the hour required is displayed. Always set the clock to
the nearest hour.
To check and adjust delivery start time
l
Press the ‘DELIVERY START’ button. The display will show the delivery start time in hours.
(A dot will also be displayed to distinguish this from the clock display).
l
To change the delivery start time press and hold the ‘DELIVERY START’ button. After 5
seconds the start time hour will increase. Let go of the button when the start hour required
is displayed.
To check and adjust delivery volume
l
Press the ‘DELIVERY VOLUME’ button. The display will show the delivery setting
(from 1 to 9)
. Each number represents a different delivery volume as shown below.
1. 100mls
4. 250mls
7. 400mls
2. 150mls
5. 300mls
8. 450mls
3. 200mls
6. 350mls
9. 500mls
l
To adjust the delivery volume, press and hold the ‘DELVERY VOLUME’ button until the
required program/volume number is displayed.
Battery Connect:
: Delivery Time
Summary of Contents for Bio-Guard
Page 1: ......
