9
3.1.2.3
Day/Night Mode
Day (Night) Mode means disabling (enabling) IR lamp, and the image shifts to
color (B/W), thus to get optimal images for day (sufficient light source) and
night (insufficient light source) conditions.
Note: When a device without IR lamp enables Night Mode means the image shifts to B/W.
Day Mode
On Page 1 of function buttons, click
(Day Mode) to disable IR lamp and
the image shifts to color.
Night Mode
Click
(Night Mode) to enable IR lamp and the image shifts to B/W.
Auto
Click
(Auto) and the system will shift Day/Night Mode automatically
according topre-set value. Notes for different devices are as follows:
Camera with IR lamp will shift to Day Mode or Night Mode automatically
according to IR Sensitivity, which can be set on Page 4 of function buttons.
Camera without IR lamp will shift to Day Mode or Night Mode automatically
according to Color to B/W value and B/W to Color value, which can be set on
Page 6 of function buttons.
Also, user can enable Camera Mode to make camera shift to Night Mode
automatically in a defined period of time.
3.1.2.4
Noise Reduction
When there are many noise points caused by environment and camera lens,
Noise Reduction function can be enabled to adjust images.
On Page 6 of function buttons, set Noise Reduction value and click
to
save setting.
3.1.2.5
Auto Adjustment
Auto Adjustment applies default settings of the camera block, which are
suitable for most conditions.
On Page 1 of function buttons, click
(All auto adjustments), and all
parameters will restore to default values.
