Access Control System User Manual
4) Enter alarm name. If the alarm input device is always disabled, which means the
circuit is usually open, user must select
“
Always Disabled
” from the dropdown list of
Alarm Type. If the alarm input device is always enabled, which means the circuit is
usually loop, user must select
“
Always Enabled
” from the dropdown list of Alarm
Type. The default setting is
“Always Disabled”;
5) Select linkage method to trigger actions when an alarm is triggered;
6) If user sets several alarm inputs, select
“All” under Copy to Alarm to copy all
configurations of current alarm input to other alarm inputs;
7) Duration: there can be maximum 10 durations on one day and each can have a start
time and end time. Please refer to the steps in chapter
Motion Detection
for details;
8) Click
“
Save
” to validate setting.
3.5.2
Alarm Output
The default duration of alarm output is 5s, and the delay time means the prolonged
period of time after the default 5s. Please select an option from the dropdown list
according
to actual request and click “
Save
” to validate setting.
Note: Alarm output is effective only when “Alarm Output” is selected under Linkage
Method on the interface of Alarm Input.
Picture 3-39 Alarm Output
