Kedacom KSCA120 Series, Quick Start Manual

Page: 22 / 32

20
Select the device(s) to be activated, enter new password, PWD confirm and email (for claiming password), and
click “
Activate ” to finish. The device will reboot automatically.
Activate Through Web Client
Set the PC and the device in the same network segment and open the browser. Enter “http://device IP:8080/” to
enter the web activation interface, as shown below. Enter new password, confirm new password and email (for
claiming password), and click “
Activate ” to finish.
2. Modify Params
Select the activated device from the IPCSearch and click “ Modify Params ” to modify network parameters on
the popup interface. After finish, the device will reboot automatically.