14
Install on No Punch Wall
1. Pinch off the dam-board at the wire hole on the shield with pliers;
2. Align the holes on the device back to the staple bolts on the shield, thread the staple bolts through the holes
and pull down the device so that the device is hung on the shield;
3. Tighten the screws at the bottom to fix the device and the shield.
[Note]
When install the device on no punch wall, double-sided adhesive tape will be necessary. Before sticking
the double-sided adhesive tape, please clean the back of the shield and the mounting wall surface so as
to ensure the firmness of the double-sided adhesive tape.
