Intelligent Camera User Manual
37
Picture 4-7 Copy
5) Check
“
Linkage Type
”. It is the alarm output method when motion detection triggers an
alarm. If checking snapshot, when motion detection triggers an alarm, the system will
capture an image. Go to
Settings > Storage > Snapshot
to set image format, resolution
and quality, and enable
“Event Snapshot” and set Time Interval and Number of
Snapshots.
6)
Click “
Save
”.
4.3 Alarm Linkage
Alarm Linkage is the system reaction after an alarm signal is received. It is to raise watch
man’s attention to handle the event.
The alarm signal comes from the alarms triggered in the set surveillance areas such as
motion detection or alarm input devices such as smoke detector.
Alarm Linkage reaction includes Alarm Text Overlay, Snapshot or triggering alarm output
device (such as alarm bell). Explanations are as follows:
Acoustic Alarm:
when an alarm is triggered, generate sound alarming (it requires the IP
camera to connect with an audio output device).
Report to Management System
: when an alarm is triggered, report it to the VMS (it requires
the VMS to support this function).
Recording Linkage
: when an alarm is triggered, start video recording automatically. Need to
install a storage card.
Text Overlay
: when alarm is triggered, display alarm text on screen.
Snapshot:
when alarm is triggered, capture the image automatically. Need to install a
storage card.
Email Notification:
when an alarm is triggered, send an e-mail to the e-mail address
automatically.
Alarm Output
: it means linking to an alarm output device. It requires the camera to support
alarm output function and has connected with an alarm output device.