Intelligent Camera User Manual
36
1) Go to
Settings > Event > Intelligent Function > Motion Detection
, and check
“Enable”.
2) Click
“
Clear All
” and then “
Edit
” and the image will be divided into 16 columns and 12 lines of
small squares. Click a square, drag toward lower right and click
“Stop”. Then the area is set as
the detected area and turns purple red. A camera supports max 4 motion detection areas at
the same time. Draw an area toward upper left that contains the defined area, or click the
defined squares one by one to clear setting, or click “Clear All” to clear setting.
3) Drag the slide bar to adjust Sensitivity. The higher the sensitivity is, the more sensitive it is to
the tiny moving objects in the detected area and the easier to trigger an alarm.
4) Configure arming durations. The default is 24-hour arming and durations are displayed in
highlight. You can custom duration(s).
Click to select a day and a window of time edition pops up (as in Picture 4-6). Edit
duration and select the st
art and end time, and click “Save” to complete.
For days without arming durations, click on the bar and drag from the left to the right to
set duration. Durations on one day cannot overlap with each other. Click the duration and a
window as shown in picture 4-6 pops up, on which you can set the start and end time more
accurately.
Click on the icon
behind the time bar and a window pops up for copying the setting.
Check days in a week or select all to copy the duration(s) from this day to those days. Click
“Delete” in picture 4-6 or
at the top to delete the duration. Click
to delete all durations in a week.
Picture 4-6 Edit duration