4
replace the battery.
C
、
Please do not operate the detector near strong electric wave situation
、
high frequency
situation or wet surface.
D
、
The detector can’t detect AC Live Wire in the following situations:
Wire in metal pipe
、
Wire in wrapped metal lines
、
Wire in metal or high-density
walls.
E
、
The detector is not suitable for detecting on metal walls or walls with high-density
metal materials.
Cautions
z
Operate with care and do not let the tool drop down.
z
Do not disassemble the tool in case of damage.
z
Do not place the tool with the corrosive gas or other corrosive
materials.
z
Avoid rain and water.
z
Do not exposed the tool to vibration and high or low temperature
environment.
z
Storage the tool indoor.
z
Do not put the tool in the water ,avoid to damage the tool.
z
Remove the battery when not in use for an extended period of time in
case of damage of tool by deterioration of battery.
TECHNICAL SPECIFICATIONS
Name
Metal and AC Live Wire Detector
Type
KC-091E
Object of detection
AC live wires and Metals
Iron pipe
40mm deep away from the wall
Copper pipe
20mm deep away from the wall
Detection
capability
AC live wires
80mm deep away from the wall
Power supply
A 9 volt block battery
（
6F22/6LR61, battery not
included
Operation current
<25mA
Operation temperature
+5
℃
～
+40
℃
Operation humidity
30%
～
70%
Storage environment
-20
℃
～
+60 ,
≤
85%
℃
（
battery not included
）
Dimensions 160mm×58mm×35mm
Weight About
110g
（
battery not included
）
z
Tips
y
Thank you for purchasing our products.
y
We hope you to understand that the tool is not a all-purpose tool that can detect all the
materials in the wall.
y
Please read the instruction manual before operation.
y
Keep the tool appropriately after use.