BASIC DISC PLAYBACK
30
Before operating
Set the initial settings as desired. Turn to instructions on initial settings beginning on page 35
more details.
Playback
Turn Power On.
Insert a disc WITH THE LABEL FACING
UP. Do not use force. The LSMD-121
will automatically switch to DVD mode
and begin to read the disc. After a short
period of time (depending on the com-
plexity of the disc), playback will begin.
To stop playback, press the STOP but-
ton.
To temporarily stop playback press the
PAUSE button.
To resume PLAYBACK, press the
PLAY button once again.
NOTE
The DVD player automatically memorizes the location where the stop button was
pressed during playback and resumes from that point when the playback button is
pressed again.
If the unit is in PAUSE mode for more than about 5 minutes, a screensaver will appear to
protect the TV hardware. Press any key to clear the screensaver. After about 10 minutes
in PAUSE mode, the power is automatically turned off.
Summary of Contents for LSMD-121
Page 27: ...DVD FUNCTION OPERATION 26 ...
Page 28: ...INTRODUCTION 27 ...
Page 29: ...INTRODUCTION 28 ...
