5.8
Graphic interface (Graphics)
The graphic interface Graphics (15-pole DSUB female connector) is used to
connect the operating panel via a connection cable XW 041-xxx to the control.
5.8.1
Cable specification
Only cables from KEBA are to be used. Connecting cable, type: XW 041-xxx
(graphic/RS-485-A cable).
chapter 3.6.3.2 "Connector" on page 20
5.8.1.1
Maximum cable lengths
Maximum cable length
Operating panel
Graphic interface (Graphics)
Length (resolution)
OP 350/C-1100
LVDS
10 m (SVGA, 800 x 600)
5.9
Connection example (CP - OP)
There is the option of operating the operating panel with different CP modules
(e.g. CP 2xx or CP 03x).
When using the CP23x , a 15-pole DSUB cable is used (XW 041-xxx) is used
as connecting cable. A Y-adapter cable (XW 042-002) is additionally required.
When using the CP 25x, CP 03x,... , a 15-pole DSUB cable is used (XW 041-
xxx) as connecting cable.
Fig.5-7:
Operating panel OP 3xx either with CP 23x, CP 25x, CP 03x,...
1
... 15-pole DSUB female connector
2
... 9-pole DSUB female connector
3
... 9-pole DSUB female connector
4
... 15-pole DSUB female connector
Operating panel
Connections and wiring
© KEBA 2009
Project engineering manual V2.00
31
Summary of Contents for Kemro OP 350/C-1100
Page 4: ......