P30
Introduction
UDP Programmers Guide V2.01
9
© KEBA
1.4
Requirements
The following requirements have to be met in order to use the UDP function-
ality:
●
KeContact
P30
c-series
or
x-series
with firmware version
3.9.14
or higher
●
The UDP interface is enabled by switching the DIP switch DSW1.3 to
“ON” (for details regarding the DIP switches, see the "installation man-
ual").
●
A PC or smartphone for sending the UDP commands.
This also requires a suitable UDP client software or UDP app.
●
The charging station has to be connected (via LAN cable or WLAN) to
the same network as the application.
Information
The latest manuals and firmware can be downloaded here:
www.keba.com/en/emobility/service-support/downloads/Downloads
1.5
Further documentation and software
Manuals, further information and software downloads are available on the
KEBA website:
www.keba.com/en/emobility/service-support/downloads/Downloads
