Keba KeContact P30 x-series, Configuration Manual

Page: 46 / 76

P30 x-series Introduction
Configuration manual V4.02
8
© KEBA
Only the covers described in the instructions may be opened. If one of the
covers is sealed by a lead seal, it is not permitted to be opened by unautho-
rized persons. If the lead seal is broken, the device loses its specific suitabil-
ity and may no longer be put into operation due to the resulting incorrect
marking.
Illustration 1-1: Screws on front part
The front part 1 may not be opened. Opening the front part (4 Torx screws)
will break the warranty seal and void the warranty. For a warranty claim,
there is a duty of proof of the customer that the defect – which led to the de-
fect of the device – already existed at the time of delivery. If the warranty
seal is broken, this proof can no longer be provided, whereby the warranty
claim expires.
A device with broken warranty seals or removed lead seals may no longer
be put into operation. The necessary steps for replacement or repair of the
charging station by the specialist dealer or service partner must be initiated.
1.5 Notes on this document
The manual is part of the product. It is to be retained over the entire life cycle
of the product and should be forwarded to any subsequent owners or users
of the product.
The instructions contained in this manual must be followed precisely. Failure
to do so could result in the creation of potential sources of danger or the dis-
abling of safety devices. Apart from the safety instructions given in this man-
ual, the safety precautions and accident prevention measures appropriate to
the situation in question must also be observed.
1.5.1 Contents of the document
● Configuration of the advanced features of the P30 x-series charging sta-
tion