Keba KeContact P20 b Series, Functions & Procedures

Page: 14 / 112

Authorization functions
14/112 - en
Key switch
The special version of the KeContact P30 has a cylinder lock fitted that allows only
users with the corresponding key to start a charging process.
The key switch [S] is used for authorizing a user with a key.
External enabling input [X1]
The described device version has the facility for authorization via an input (N.O.
contact) using an external, potential-free switch. In this case, observe the logical
link between the authorization versions in particular. The correct installation and
configuration process can be found in the "Installation manual".
RFID Reader
The special version of the KeContact P30 has an RFID reader fitted that allows au-
thorization via RFID tags.
The RFID reader [R] is used for contactless authorization of a user via RFID tags
conforming to ISO14443 and ISO15693.
RFID Whitelist
List of RFID tags where it is permitted to start a charging session with activated
RFID authorization.
● P30 b-series and c-series permit 20 entries in the RFID whitelist.
RFID master card
First programmed RFID card in the charging station whitelist.
It is used to start and confirm the programming process for all further RFID cards
(slave cards). It is also used to authorize a charging session.
RFID slave card
RFID card on the charging station whitelist. It is used to authorize a charging ses-
sion.
LED bar display
The display provides information on the current operating status of the charging
station. It consists of 4 segments (
[S1] to [S4] ) which can light up or flash, together
or individually, in different colors.
The LED bar display is only visible with activated power supply.
Service button
The service button [Service] is located in the connection panel on the charging
station. To access this button, the design cover and the connection panel cover
must be removed.