KC-P30 x-series
Configuration
Configuration manual V4.14
17
© KEBA
Necessary steps
The following steps are required to transfer the configuration from one P30
x-series to another P30 x-series:
●
Creating a configuration
●
Read out configuration
●
Adapting the configuration file
●
Import configuration
3.4.1
Create configuration
If this has not yet been done, a first P30 x-series must be configured with the
desired settings. These settings serve as the basis for the configuration of
additional P30 x-series.
The easiest way to configure the charging station is via the web interface.
On the graphical user interface the available settings and selection fields are
provided with short explanations.
Information
Not all settings available in the web interface can be transferred via USB
stick to additional charging stations.
3.4.2
Read out configuration
In order to be able to transfer the configuration of one P30 x-series to addi-
tional P30 x-series, the USB stick must be connected to the USB interface
(in the connection panel) of the operationally ready and already configured
charging station. The charging station automatically transfers the configura-
tion to the USB stick and displays the process on the display. When finished,
the charging station indicates that the USB stick can be removed by display-
ing "remove usb".
Information
Do not remove the USB stick during the writing process! Otherwise it can-
not be used for another configuration.
3.4.3
Adapt configuration file
To adapt the configuration file, the USB stick must be connected with a com-
puter. The configuration file was saved on the USB stick in the directory
CFG
as a
*.conf
file. To use the file to configure other charging stations, the file
name and parts of the content must be adapted.
