5
Supplements to the operation manual 1040.00B.4-00 CDF3000
Operation Manual CDF3000
ID no.: 1040.20B.5-00 Date: 02/2022
Supplements to the operation manual 1040.00B.4-00 CDF3000
01.10 Note related to chapter 1 Safety
y
Awareness of national accident prevention regulations (e.g. DGUV V3 in
Germany)
01.11 Note related to chapter 1.2 Intended use
When installed in machines the commissioning of the drive controller (i.e. start-up of
intended operation) is prohibited, unless it has been ascertained that the machine fully
complies with the provisions of the EC Directive 2006/42/EC (Machinery Directive);
compliance with EN 60204 is mandatory.
Commissioning (i.e. starting intended operation) is only permitted on strict compliance
with the EMC directive (2014/30/EU).
The CDF3000 conforms to the EMC Directive 2014/30/EU.
On this topic, also see chapter “01.9 CE declaration”.
01.12 Note related to chapter 3.3 Connecting the
power packs
The positioning controller is only allowed to be connected to power supply units
(stabilised and smoothed) that satisfy the requirements for a protective extra low voltage
(PELV) with safe isolation in accordance with EN 61800-5-1 or EN 50178.
01.9 CE declaration
Figure 01.2
CE declaration
Summary of Contents for CDF3000
