KEB COMBISTOP 28, Installation Manual

Page: 19 / 48

19
DEvIcE DATA cOMbISTOP 28
3.2 Device data cOMbISTOP 28
3.2.1 Overview
Unit size 02 03 04 05 06 07 08 09
Rated torque after run in M
2N
/ Nm 5 10 20 36 70 100 150 250
Rated power P
20
/ W 25 30 30 48 62 65 75 80
Rated voltage U
N_dc
/ V 24 / 105 / 180 / 205
5)
Cyclic duration factor
ED
/ % 100
Speed for service braking rpm 3000 3000 3000 3000 3000 3000 3000 1500
Max. speed for emergency braking rpm 6000 6000 6000 5000 5000 4500 3500 3000
Mass moment of inertia J / 10
-3
kgm² 0,025 0,072 0,136 0,35 0,56 1,57 5,92 7,38
Air gap X
N
/ mm 0,4 0,5 0,6 0,6 1 1 1,2 1,2
Switching cycles for half-wave rectifiers
1)
SC1 / rpm 60 40 40 25 5 5 5 2
Switching cycles for bridge rectifier
1)
SC2 / rpm 120 75 75 50 10 10 10 5
Switching cycles with powerbox DC SC3 / rpm 55 40 40 25 5 5 5 2
Separation time
2)
t
2
/ ms 40 60 100 120 240 240 300 350
Separation time with powerbox
2)
t
2
/ ms 20 35 50 60 120 120 150 170
Response delay AC
3)
t
11_ac
/ ms 40 80 140 180 200 400 700 900
Response delay DC
3)
t
11_dc
/ ms 10 15 20 25 25 50 60 60
Connection time AC
4)
t
1_ac
/ ms 90 140 200 240 330 650 900
1200
Connection time DC
4)
t
1_dc
/ ms 20 30 50 55 90 150 180 220
Feather key according to DIN 6885/1
Keyway according to DIN 6885/1
ISO class B (optional F and H)
Table 5: Device data COMBISTOP Type 28
1) Maximum permissible switching cycles when switching DC-side, continuous operation (100% ED) and max. operating temperature of 80°C.
2) Disengagement time from power-on to the beginning of the torque drop.
3) Delay time from switching off the current to the increase of the torque.
4) Connection time from switching off the current until reaching 0.9 x rated torque M
2N
.
5) 105/180/205 V are subject to the Low-Voltage Directive, => „11.1 EU Declaration of Conformity“