KEB C6, Instructions For Use Manual

Page: 52 / 74

52
COMMISSIONING
To transfer the project click on the button “Upload Project”. Once the transfer is complet-
ed, click “Start Device Project” to run the application.
the name of the memory are according to the following table:
Memory
Name used by the user
system
Note
NAND NANDFlash
Internal memory used to store the oper-
ating system.
It is a read-only memory.
MMC MMCMemory
For saving data and executable pro-
grams.
Read and Write memory.
Figure 46: COMBIVIS connect Router E2/L2 models
Please refer to the "COMBIVIS connect Software User Manual" for additional informa-
tion on retrieving data loggers of the E2/L2 router systems.
COMBIVIS connect E2/L2 models with integrated 2G/3G/3G+ modem support
the SMS alarm notification; the COMBIVIS HMI alarm dispatcher software is
already configured to use the internal modem. You only need to configure the
alarm thresholds according to the application requirements. Please see the
COMBIVIS studio HMI online help for further information about how to setup
alarm notification via SMS.
COMBIVIS connect E2 models without integrated modem, DO NOT support
alarm notification via SMS. Only e-mail notifications are supported.