background image

SERVICE INFORMATION

If you have a service related question call 1-800-KEATING.

Please state the nature of the call; it will ensure speaking with the appropriate person.

Have your serial and model number available when ordering parts.

KEATING OF CHICAGO, INC.

8901 W. 50th Street, McCook, Illinois 60525-6001

Phone: (708) 246-3000   FAX: (708) 246-3100

Toll Free 1-800-KEATING (In U.S. and Canada)

www.keatingofchicago.com

*As continuous product improvement occurs, specifications may be changed without notice.

KEATING LIMITED WARRANTY CARD

PLEASE COMPLETE AND MAIL AT ONCE–WARRANTY IS NOT IN EFFECT UNTIL CARD IS RETURNED.

WARRANTY CARD IS ALSO AVAILABLE TO COMPLETE ON LINE AT YOUR CONVENIENCE.

COMPANY: __________________________________________________________________________________________________________________

ADDRESS: __________________________________________________________________________________________________________________

CITY: ______________________________________________________________________________ STATE:

________________ ZIP: ____________

DEALER: ____________________________________________________________________________________________________________________

DATE OF PURCHASE: ________________________________________________________________ INVOICE NUMBER: ____________________

SERIAL NUMBER: ________________________________________

FRYER

FILTER SYSTEM

GRIDDLE

REMARKS: ______________________________________________

TOP-SIDE COOKER

HOT PLATE

PASTA PLUS

I HAVE READ THE INSTALLATION AND OPERATION INSTRUCTIONS.

SIGNED: ____________________________________________________________________________________ DATE: __________________________

“Serving Those Who Serve The Very Best

®

t e p p a n y a k i

0 8 / 1 0

Summary of Contents for MIRACLEAN












Reviews: