background image

SAFETY
PRECAUTIONS

THIS SYMBOL WARNS YOU THAT SERIOUS BURNS
OR OTHER INJURIES MAY RESULT IF SAFETY
INSTRUCTIONS ARE NOT FOLLOWED.

This service manual should be retained in a safe
place for future reference.  The installation of your
new Pasta System must conform to local codes
and with the current National Electrical Codes and
regulations as applicable.

Your ventilation hood, when installed, must
conform to the current standards.

No frame or restriction shall be constructed around
the Custom Pasta System that will restrict air
movement into the Pasta System or prevent
proper ventilation.

You must maintain this appliance free and clear 
from combustibles.

Adequate clearance for servicing and proper
operation must be maintained. Your pasta system
is designed to be serviced from the front.

Keating Custom Pasta

Systems are not intended

for household use.  Installation in household voids
warranty.

ALWAYS instruct new employees on proper pasta
system operation.

A Custom Pasta System

should be operated 

ONLY by properly trained personnel.

ALWAYS turn pasta system off each night.

ALWAYS turn pasta system off at customer power
panel before servicing.

NEVER leave a pasta system unattended during 
operation.

NEVER move a pasta system when full of hot 
water.

NEVER introduce objects or liquids into pasta 
system, while operational, which are not designed
or made for cooking.

THIS CUSTOM PASTA

SYSTEM MAY NOT BE 

ALTERED, MODIFIED OR CHANGED IN ANY
WAY. 

IF THE EQUIPMENT IS NOT

INSTALLED, OPERATED AND
MAINTAINED IN ACCORDANCE
WITH THE ABOVE,
CONCENTRATIONS OF CARBON
MONOXIDE IN EXCESS OF THE
ESTABLISHED LIMITS COULD BE
PRESENT IN THE KITCHEN
ENVIRONMENT.

ALL PERSONNEL IN THE WORK PLACE WHO MAY
BE SUBJECT TO ANY EXPOSURE OF CARBON
MONOXIDE MUST

BE WARNED OF SUCH

POSSIBLE EXPOSURE. THIS WARNING SHOULD
BE CONVEYED IN A MANNER SO THAT IT IS
CLEARLY UNDERSTOOD BY THE EMPLOYEE, AND
THE EMPLOYEE SHOULD BE ASKED IF IN FACT HE
OR SHE UNDERSTANDS THE CORRECT METHOD
OF OPERATION OF THE EQUIPMENT AND THAT A
RISK OF EXPOSURE EXISTS IF THE EQUIPMENT
IS OPERATED IMPROPERLY.

IF NOT INSTALLED, OPERATED AND MAINTAINED
IN ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS, THIS PRODUCT COULD EXPOSE
YOU TO SUBSTANCES IN FUEL OR IN FUEL
COMBUSTION WHICH CAN CAUSE DEATH OR
SERIOUS ILLNESS AND WHICH ARE KNOWN TO
THE STATE OF CALIFORNIA TO CAUSE CANCER,
BIRTH DEFECTS OR OTHER REPRODUCTIVE
HARM.

WARNING

Improper installation
can cause damage,
injury or death.

3

Summary of Contents for 24763



























Reviews: