KE LOGEM LGH 28.8D1, Operation Manual, Page: 118 / 200

118 Operation Manual V.34 - Modems, Version 07/97
REG
Chapter 4
S67 M3 Function at Dial Backup
If the register is set to 1 during leased line operation the report line M3 is
active constantly thus allowing the DTE to detect any switching to
switched line operation.
register values / default description
S67 0, 1/ 0 M3 function at dial backup
0 M3 operates normal
1 M3 is constantly active at leased
line operation
S68 Establish Dial Backup Connection
The register S0 may not be set to 0 if call acception is needed.
register values / default description
S68 0...6 / 0 establish dial backup connection
0 establish backup route automatically
1 establish after pressing Da/Te button
2 establish at activated S4/SEL line
3 establish after pressing Da/Te button
or at activated S4/SEL line
4 as 1, call acception possible
5 as 2, call acception possible
6 as 3, call acception possible
Attention! The features described on this side are only valid for
dial backup operation. They are not applicable for the
top rail version LGH 28.8D1.
Register Description