A
Indicator switches
(Indicator off)
(Indicator on)
How to use
You can also use a timer and minus ions functions.
You must select an operation mode before using these functions. (
Page 13)
●
Setting the timer
Emitting minus ions
You can widen the flap to
increase the range of dry
air blowing.
Installing the louver and flap
Flap
Flap
Tab
Protrusions
Protrusions
Hole
Hole
Louver
Louver
Protrusion
hole
Protrusion
(Main Unit)
Wide-angle
range
This setting
is convenient
for drying
clothes.
Press
Press
●
Each press changes the timer setting.
●
The Timer indicator changes as time passes, indicating
how much time remained.
●
If the Full Water indicator flashes while the timer is set,
the timer will continue to count down.
●
The minus Ions indicator turns on, and minus ions are
emitted from the air outlet.
●
The flap can be adjusted
manually to widen the range
of air flow (3 settings).
Insert the protrusions on
each side of the flap
(2 locations) into the
holes on each side of
the louver (2 locations),
one at a time.
●
Align the protrusion on the
louver with the hole on one
side of the unit (
in the
figure below), and insert it
securely. Then, insert the
protrusion (Main Unit) on the
other side.
●
With the tab of the flap
facing upward, attach
the flap to the louver.
●
Press the button again to stop the minus ions emission.
(The Minus Ions indicator turns off.)
●
The minus ion function cannot be used alone but
together with other operations.
●
Minus ions are produced in abundance amount that is
simulated as natural settings such as forests and waterfalls.
They are microscopic particles that create a negative
electrical field in the air.
・
A
15
YT60ZH
