background image

2

To avoid the possibility of causing injury to users or damage to properties, please follow all the explanations written below.    

  

This symbol denotes an action that is COMPULSORY.

This symbol denotes an action that is PROHIBITED.

WARNING

A state that  may be caused by the mishandling of products, which, if not avoided, 
may lead to the possibility of death or serious injury of users.

CAUTION

A state that  may be caused by the mishandling of products, which, if not avoided, 
may result in the injury of users or property damage.

Safety precautions

Always follow these instructions

WARNING

Do not install the Ceiling Fan near chemicals and 
alkaline.

Can cause 

fi

 re, explosion, short circuit and electrical 

shock.

Do not damage the wire during installation e.g. 
deform due to heat, twist, bend, etc. 

Can cause 

fi

 re, explosion, short circuit and electrical 

shock.

Do not use power supply other than rated voltage 
mentioned.

Overheating can cause electrical shock and 

fi

 re.

Do not insert any metal items in the battery area 
with the Battery.

Can cause 

fi

 re, explosion, short circuit and electrical 

shock.

Do not hang onto the Ceiling Fan.

Can cause injury if Ceiling Fan drops.

Do not disassemble the Ceiling Fan unless stated 
by this manual.

Must use only supplied parts.
Can cause 

fi

 re, electrical shock, injury and Ceiling Fan 

to drop.

Do not touch the Ceiling Fan while it is operating.

Can cause injury, damage and Ceiling Fan to drop.

Do not sprinkle water to the Ceiling Fan or do not 
wet the Ceiling Fan.

Can cause 

fi

 re, explosion, short circuit and electrical 

shock.

Follow strictly all the instructions given in this 
manual for installation.
Electrical or installation work needs to be performed 
by a quali

fi

 ed individual.

Installation error can cause 

fi

 re, electrical shock, injury 

and Ceiling Fan to drop.

Switch off the power supply and wait until the 
Blades is fully static, before cleaning or doing any 
maintenance jobs.

Can cause injury and electrical shock if Ceiling Fan 
move suddenly.
Kindly refer to your authorized dealer for repairing or 
maintenance issue.

Tighten the Blade Screws 

fi

 rmly using a 

screwdriver.
(250-300 N•cm)

Can cause injury if Blade drops.

Ensure that the Ceiling Hook can sustain more than 
10 times the Ceiling Fan weight.

Can cause injury if Ceiling Fan drops.

Stop using the Ceiling Fan when any abnormality or 
failure occurs and turn “OFF” the Miniature Circuit 
Breaker (MCB).

Risk of smoke, 

fi

 re, electrical shock and drop.

Please contact your authorized dealer for maintenance/
repair.

Dismantle the broken or damaged Ceiling Fan.

Can cause injury if Ceiling Fan drops.

If unusual oscillating movement is observed, immediately 
stop using the Ceiling Fan and contact the manufacturer, 
its service agent or suitably quali

fi

 ed persons.

Can cause injury if Ceiling Fan drops.

Do not install the Ceiling Fan at oily and dusty 
places.

Can cause 

fi

 re, explosion, short circuit and electrical 

shock.

Do not install the Ceiling Fan near 

fl

 ammable areas 

such as a gas cooker.

Can cause 

fi

 re, explosion, short circuit and electrical 

shock.

Summary of Contents for K15YC

























Reviews: