Handle
Tank
Water viewer
Full line
Full Tank indicator
(flashing)
Full
Tank
Removing the tank
Installing the tank
Remove the tank cap
and pour out the water.
2
Slowly pull out the tank
1
●
Hold the unit firmly and pull out
the tank by the handle, being
careful not to spill any water.
●
Be sure to put on the tank cap before installing the tank. Failure to do so may cause the
water to spill.
●
When you remove the tank, do not touch any internal parts of the unit. Doing so may damage the product.
●
Be sure to push the tank gently into the unit. Banging the tank against anything or failing to push it securely
may cause the unit stop operating. (Full Tank indicator) If this happens, remove the tank and try pushing it in
gently once again.
When the tank is filled up fully (about 2.9 liters),
the unit will automatically stop running.
●
The Full Tank indicator flash.
(All other indicators will turn off.)
●
When an empty tank is returned to the unit,
operation will resume in the same manner
as previous operation.
(The Full Tank indicator turn off.)
When the tank is full
Put on the tank
cap securely.
1
Push the tank
gently all the way in.
2
Water
Outlet
Tank Cap
Push in gently.
Carry a full tank
carefully by the
tank handle.
Tank
Handle
Empty the tank
How to use
Important:
Tank Cap
Pin
①
Hold the knob and put the
tank cap to the tank.
②
A "tick" sound happened
when the tank cap is
correctly installed.
Pull the knob to
remove the tank
cap.
21
GZG90H
