What to do if...
●
Is cold, moist air getting into the room?
→
Avoid opening and closing the doors/windows very often.
●
Is it an item which is difficult to dry and need to be squeezed
dry by hands?
●
Are you using a heater near the unit?
→
If the temperature near the sensor is high, it will not be able to
accurately judge the drying time.
●
Does the air flows through all of the clothes?
Also, are the clothes packed close together or piled up?
→
For clothes that are difficult to get dry, try running the dryer in
"
Auto
"
or
"
Cont.(Hi)
"
again.
●
Depending on the amount and type of clothes, they could be difficult to
get dry.
A
Hole
Hole
Louver
Pin
Pin
Flap
Louver
Pin on the unit
Hole
Dry
clothes
function
Takes long time to
dry clothes in
"
Auto
"
mode
Does not dry
clothes completely
even after "Auto" mode
is finished.
(
)
●
Try using "Normal" mode under "Dehumid."
(
page 13)
→
Drying time is longer than " Dry Clothes".
Operate with loud
noise
The unit has been
knocked over
The louver / louver
flap is detached
Immediately place the unit in upright position.
(Do this quickly to prevent as much water leakage as possible)
→
The unit will automatically stop running.
→
The Full Tank indicator will flash.
●
Install the louver by
attaching the pin into the
slot as shown in
○
A .
●
I
nstall the flap by
attaching 2 pins to the
equivalent holes on the
louver.
20
