安裝方法
HOW TO INSTALL
推入
時
請注意 不 要夾傷 線
。
機 體
，
Push the main body upward into the ceiling board
and wooden frame by closely leaning against the
adapter, clip the clipping position of the main body
into the locating slot of the adapter (otherwise,
may have air leakage), and fix the main body with
six 4 x 30 self- tapping screws.
6
提 示事項
Notice
Please be careful not to pinch the cord, when push
upward the main body.
將機體緊靠出風口接頭往上推入天花板與木框
，
(否則漏風)
，
並使機體上卡位卡入出風口接頭定位槽中
用 顆
的自攻螺絲將機體牢固地固定
6
4x30
。
Locating slot of the adapter
出風 口 接頭定 位 槽
Clipping position
of the main body
機
體
卡
位
Self-tapping
screws
4 x 30 (6 pcs)
自攻 螺絲
4x30
(
6
)
顆
10
Loosen
the
screws
of
the
cord
clip.
將固定電源線線夾的螺絲鬆脫
。
Loosen the screws of the pillar terminal , insert the
power cord(not supplied)connected to the fixed
wiring which in the house into the pillar terminal ,
tighten the screw.
鬆開接線柱上的螺絲
，
將接入室內固定線路的電源線
（用戶自購）插入接線柱
，
擰緊接線柱螺絲
。
Fix the cord cover by the screws which
removed by step .
用步驟 拆下的螺絲
將接線蓋板重新固定
。
，
用 線夾 將電 源線 固定
。
(
線 夾必 須壓 住電 源線絕緣 護 套
)
Fix the power cord with the cord clip.
(The cord clip must pin the insulation
sheath of power cord.)
注意
CAUTION
When covering the terminal cover, be sure not to suppress
the earth wire, otherwise it may damage the earth wire.
蓋端子保護蓋時
，
請注意不要壓到地線
，
否則可能會壓傷地線
。
Screws
螺絲
線夾
Cord clip
Terminal
接線柱
地線
Earth
wire
Screws
螺絲
線 夾
Cord clip
Terminal cover
端 子保 護蓋
5 -2
5 -3
5 -4
5 -5
5 -1
5 -1
