KDF Plus Series, Instruction Manual

Page: 27 / 31

25
◆
Explanation of operation keys
・
F1
（
Standby
） ：
Memorize the setting contents and shift to the standby mode.
・
F2
（
SD output, input
） ：
PID constants can be output and input to the SD card.
While holding down this key, use the right direction key to output and the
left direction key to input. The data will be written to the root of the SD card
with the following file name. It can be edited as a CSV file with software
such as Excel. If you want to save after editing, please save in CSV format.
Output file name
： EFP_PID.CSV
・
F3
（
UP
） ：
Change (increase) each value.
・
F4
（
DOWN
） ：
Change (decrease) each value.
・ Up and down direction ： Moves each item.
・
Left/right direction
：
Performs input/output processing to the SD card in combination with the F2
key.
■
SD card mode
・
In the maintenance mode, press the "F3" (SD card) key to switch to this mode.
In this mode, you can read and write the program contents and write the maintenance information
contents to the SD card.
When you want to edit the program contents on the PC, back up the program contents, or when there
is a failure please use it when you send us the usage data.
◆
Program contents Export
／
Import
・
Insert the SD card into the slot and press the F2 key for writing and the F4 key for reading.
The output file is written in the root of the SD card as one file for each program pattern It will be.
When you export, 50 files from pattern 0 to 49 are created.
Output
file name
：
EF_PRG0.CSV ~ EF_PRG49.CSV
・ When editing data with software such as Excel, edit the time "--:--" setting with "9999".
Also, the pattern name can be up to 16 single-byte characters consisting of uppercase letters, numbers,
and symbols (see program mode).
When you want to save after editing, save it in CSV format.
・ If you leave only the file of the pattern you want to read in the SD card when reading, only that pattern
can be read.