86
Setting FeliCa Lock
You can restrict the use of EZ FeliCa by setting FeliCa Lock on. You can
temporarily release the FeliCa Lock and use EZ FeliCa for a certain
period of time by holding down
r
for about one second while the
standby screen is displayed and entering the lock No. (quick release).
While the standby screen
is displayed, press
c
4151
.
Press
1
(ON), enter the
lock No., and then press
c
(OK).
The FeliCa Lock is set.
◎
When FeliCa Lock is set,
appears on the standby screen.
◎
In case you lost W51H, you can set the FeliCa Lock by
setting Remote Auto Lock. Remote Auto Lock requires
the initial setup beforehand.
◎
Even if you set Auto Lock, the FeliCa Lock will not be set.
If the battery discharges while the FeliCa Lock is on, you will be unable to release
the FeliCa Lock. Be careful of the battery level. When your battery is discharged,
recharge the battery and then release the FeliCa Lock to use EZ FeliCa.
■
Releasing FeliCa Lock temporarily (quick release)
When the FeliCa Lock is on, hold down
r
for about one second while the standby
screen is displayed, enter the lock No., and then press
c
(OK).
The vibrator works, “FeliCa Lock Quick releasing” is displayed and the FeliCa Lock
is temporarily released.
◎
If you press
F
or when “Quick Release” (about 5 minutes is set at the
time of purchasing) elapses, W51H returns to FeliCa Lock status.
◎
You cannot start FeliCa-supported EZ apps while FeliCa Lock is
temporarily released.
