18
Saf
et
y P
recautions/Not
es on w
at
er
pr
oof
, dustpr
oof and shoc
k-r
esist
ant pr
oper
ties
Closing the back cover
Close firmly so that the back cover is not raised.
①
Place the back cover aligning its tabs with the grooves of the product.
②
Push the back cover in the direction of the arrow.
③
Press and slide your finger over the circumference of the back cover in the
direction of the arrow to firmly attach it.
Tabs
Grooves
②
③
①
• Do not immerse the product in water with soap, detergent or bath salts in it.
• Do not immerse the product in seawater, a swimming pool or hot spring.
• Do not immerse the product in any liquid (alcohol, etc.) other than water.
• Do not place the product directly on the sand at a beach, etc. Grains of sand
or other small particles might get into the microphone or speaker causing the
volume to drop. And if sand gets inside the product from the hinge part, it
might cause overheating or a fault.
• Do not use the product underwater.
• Do not leave the product in a humid place such as a bathroom or kitchen for an
extended period of time.
Soap, detergent,
bath salts
Seawater
Pool water
Hot spring
Sand, mud
Tips for comfortable use
•
Once the product gets wet, water may remain in gaps on the product. Shake
the product well to drain water. Especially make sure to drain water remaining
in the back cover, key parts, and charging terminals.
•
Even after the water is drained, the inner parts might still be wet. Although you
can use the product, do not place it near things that must not get wet. Take
care not to wet your clothes, bag or contents of the bag.
•
Drain water if it becomes temporarily hard to hear the sound due to water
remaining in the microphone.
■
Notes on various usage scenes
<In the rain>
You can make calls holding the product with wet hands in the rain without an
umbrella.
• The rain in this case means a moderately-heavy rain (less than 20 mm per
hour).
• Never open/close the external connection jack cover or back cover if the
product is exposed to rain, or your hands are wet.
<In the shower>
You can make calls holding the product with wet hands while taking a shower.
• Avoid spraying the product with high-pressure water, as the product is not
designed to withstand high water pressure.
<Washing>
Y
ou can wash the product under a mild flow (up to 6 liters per minute) of tap
water at room temperature (5°C to 35°C) at a distance of about 10 cm from the
faucet or showerhead.
• Do not spray the product with high-pressure water or submerge it in water for
extended periods of time, as the product is not designed to withstand high
water pressure.
• Make sure that the back cover is tightly closed, and holding the external
connection jack cover so that it does not open, wash the product with your
hands. Do not use a brush or sponge.
• Do not wash the product in a washing machine or ultrasound bath.
• Do not splash the product with or immerse it in soap water, detergent water,
etc. other than tap water.
