64
EZne
wsf
lash
EZnewsflash
Use the EZnewsflash to display flash news on the standby
screen. You can check the news details and other
information by selecting the ticker field.
You can use the EZnewsflash by making a few simple settings
following the EZweb initial setup.
Basic Operations
• The EZnewsflash information is automatically
received at no charge. Note, however, that packet
communication charges may be incurred for manual
updates and connecting to EZweb sites. In this case,
a confirmation screen for network connection is
displayed.
• The EZnewsflash information is updated at regular
time intervals. appears while receiving information.
Setting EZnewsflash
The EZnewsflash is available free of charge. You have
only to make a few simple settings. After following the
procedure in “Initial Setup of E-mail and EZweb” on page
34, configure EZnewsflash settings. If you did not configure
the EZnewsflash settings at the time of the initial setup,
follow the steps below.
When the standby screen is displayed, press
u
and select the ticker field and then press
c
(OK).
➡
Follow the on-screen instructions.
The setup procedure is completed.
• When the standby screen returns, a message asking
you to wait for a while until the next update takes place
appears in the ticker field.
EZweb Subscription Required
Check the news.
Select the ticker field.
Select the info pane.
Check the
weather forecast.
Press
u
on
the standby
screen.
