14
Manager mode is the product setting mode that allows a installer to configure the device.
environment(setting door-phone number and the type of door-phone camera) needed for operation.
*Manager mode ends automatically and standby mode is on when about 1 minute passes without
button input.
•
When you are in Manager mode, you will not receive any door-phone, extension or interphone call.
※
The product must be turned off and on again to save and apply the configuration changed in
Manager mode .
※
When power is OFF
→
ON in the middle of changing the configuration on Manager mode, the
modification may fail to be applied.
To select MANAGER MENU
- Enter “MANAGER” mode by pressing and holding the Door Open button for more than 3 seconds in
a standby state after power is on.
[Initial screen after it is switched on ]
[MANAGER MODE SCREEN]
UHA-742SG/SGM
[MAIN PHONE]
www.kdone.co.kr
[MANAGER]
DEVICE TYPE
PHONE ID
CAMERA NUM
CAMERA TYPE
EXIT
