Important
Contact us:
Web:
www.kctdirect.co.uk
V.1
1. Please read the advice and safety instructions carefully before assembling.
2. Remove all packaging materials. Check all the components are supplied in full
(see list of components).
3. Warning: Before assembling, examine the product for transport damage. No liability is accepted for
damage to a product that has already been assembled.
4. To prevent scratching please assemble this product on a clean, smooth surface (e.g a carpet).
may not be guaranteed.
7. Disclaimer: Liability - including for consequential damage - will cease to apply if any defect has been
caused by incorrect or improper assembly.
8. Please only use wall plugs and retaining screws that are suitable for your type of wall and the weight
of the unit (wall plugs or screws and tools for wall mounting are not supplied with the product).
Warning: When assembling do NOT drill into water or electrical conduits.
If the connector tabs of the shelf cross pieces bend on assembly, they can be bent back into their
must be evenly distributed so that no harm can come to the wooden boards. The unit is not suitable for rooms
with elevated humidity, as this could cause damage to the wooden boards.
Warning!
Always wear gloves when assembling the unit to prevent injury. Never exceed the maximum shelf
load or the maximum load for the complete unit array (see details on the packaging or on the unit itself).
2.
